Skip to content
Content SnareHelp centre

Set up two-factor authentication

Quick answer

Turn on two-factor authentication under Passwords and 2FA in Settings, then scan the QR code with an authenticator app on your phone. After that, every login asks for a six-digit code from the app. Save the ten recovery codes from the end of setup somewhere other than your phone, because you only see them once.

Two-factor authentication adds a second step to logging in. After your password, you enter a short code from an app on your phone, so a stolen password alone isn't enough to get in. You can turn it on for your own account, whatever your role, and it's there on every plan.

What you need

An authenticator app on your phone. It generates a fresh six-digit code every 30 seconds. Google Authenticator is the most popular one and runs on both Android and iPhone. 1Password, Authy, and Microsoft Authenticator all work too.

Content Snare uses authenticator apps only. There's no SMS option.

Turn on 2FA

  1. Click your avatar in the top right.
  2. Choose Settings, then Passwords and 2FA.
  3. Click Enable 2FA to start.

If Enable 2FA is grayed out, it's usually because you joined through an invite or a magic link and never set a password. Set one first and the button becomes clickable.

A setup window opens:

  1. In your authenticator app, add a new account and scan the QR code on screen. If your phone can't scan it, click Show secret key for manual configuration and type the key into the app by hand instead. Content Snare then appears in the app.
  2. Enter the six-digit code your app shows for Content Snare. You might need to tap Reveal PIN or similar in the app to see it. Content Snare verifies the code before turning 2FA on, so if it's wrong you can try again.

Save your recovery codes

Recovery codes get you back into your account when you can't reach your authenticator app, like when a phone is lost or wiped.

Content Snare shows you ten codes once, at the end of setup. Copy them somewhere safe that isn't your phone, then tick I have saved my recovery codes to finish. Each code works once. Content Snare won't show them again, and the only way to get a new set is to turn 2FA off and on again.

Once 2FA is on, Content Snare signs you out everywhere except the browser you set it up in. Sign back in on the others with your password and a code from your app.

Log in with 2FA

Every login now asks for the six-digit code after your password. Open your authenticator app, find Content Snare, and enter the code it shows.

To skip the code on a device you use often, tick Trust this device when you log in. That browser won't ask again for up to 90 days, and only that browser. Clear your browsing data and it asks again straight away.

If a code your app shows keeps getting rejected, see my 2FA code isn't working.

If you lose your phone or your recovery codes

A recovery code gets you back in when your app isn't available. On the code screen, choose to use a recovery code instead, then enter one of the ten you saved. They are longer than the six-digit code your app shows, so they won't fit in that box. Logging in covers the same steps from the login screen.

If you've switched phones, see I've got a new phone and can't get past 2FA.

If you've lost both your phone and your recovery codes, contact support to regain access. That can take up to three days, and you'll need to prove who you are. Support will ask you some questions about your account to confirm it is yours, so have your account details to hand.

Turn off 2FA

  1. Click your avatar in the top right.
  2. Choose Settings, then Passwords and 2FA.
  3. Click Disable 2FA.
  4. Enter your account password and confirm.

Leaving 2FA on is the safer choice.

Once it's off, delete Content Snare from your authenticator app.

If you turn 2FA back on later, the old recovery codes stop working. You'll go through setup again and get a new set.

If your company requires 2FA, Disable 2FA is grayed out and you can't turn it off. Administrators see a link to the company's security settings to review the requirement, and everyone else sees a note that an administrator has turned it on for the whole company. To set up company-wide 2FA, see Require 2FA for your company.